The experience of watching a movie greatly depends on where and how you watch it. More often than not, the go-to way of watching is staying at home in the comfort of your beds and couch. But how to watch theater movies at home?
While it may be true that going to the theater has its perks, you can easily create a similar environment in your house. That not only allows you to save money but also lets you control how you watch the movie. For example, if you want to skip a particular part or rewatch one, you can; it is all up to you.
As the world is advancing rapidly, new products are emerging almost every day for your convenience. One useful product is a home theater system which you can install in any room of your house. While the idea of creating an entire theater sounds complicated, the process is actually straightforward.
Before you start browsing through different systems, you need to figure out where you are going to place it. A theater system takes up a lot of space, so you do not want to overestimate your room size. It is safer to take the dimensions and tally them with the theater systems you are looking at currently.
Most theater systems do not include any TV in their sets. You should choose one that seems the most appropriate for your room setting.
The idea that a bigger TV will give you a better experience is true to an extent, but do keep in mind that there should be an adequate distance between you and the TV. If you are sitting too close, it can ruin the experience and damage your eyesight. So make sure to measure your TV diagonally from the top to the bottom of the screen.
The other thing you should look out for is a high-resolution TV. A high-resolution gives you sharper picture quality and enhances your movie-watching experience. You should aim to have either a 4K Ultra HD (2160p) or a Full HD (1080p) since the higher pixels in these give you better resolution.
An alternative to a TV is a blank wall and a projector. Using a projector is beneficial as it allows you to adjust the screen as long as there is enough space on the wall. The only downside is the distance you need, which is around 12 to 15 feet between the projector and the wall.
A few general things that you will need to create your home theater system include:
A home theater receiver is an essential part of the entire setting. For example, if you have a Blu-ray player, the first thing you would do is put in a Blu-ray disc. Once the disc starts working, the home theater receiver will pick up the signals sent.
In short, the signals will be sent out by the DVD player. The signals will then be picked up by the wire connecting it to the receiver, allowing you to view your movie on your television.
You may think that connecting the DVD player directly to the TV is a better option. With that being said, the former setup is easier for two reasons.
If you connect the DVD player to the receiver, you will only need one remote to control the TV. Secondly, you can easily attach the speakers to the receiver. Without the receiver, you need another setup to connect the speakers to the TV.
In addition, as far as wires go, you will want to use HDMI for practically everything. You can use the cheaper ones that work just as efficiently as the expensive ones. You will, however, need to invest in another cable for the speakers so that you have good sound quality.
For excellent audio quality, you need to check which speakers would work for you. While the home theater system may primarily be used for movies, you can also listen to music. Hence, it depends on what you want to use it regularly.
For a good movie, we suggest getting seven to eight smaller speakers because those help the multitrack factor more than two large ones. Listening to music is different because sound quality really matters. Thus, when you are looking for speakers for music, think about investing in high-quality ones.
The first thing you should check is whether or not you have connected everything correctly. Each product usually comes pre-set, and if that’s the case, you do not need to worry about that. One thing to note is whether your source is outputting the surrounding sound.
Even though the TV should automatically detect any peculiarities, you should check the settings yourself to see whether your Blu-ray DVD player is outputting 16×9 and 1080p.
Now that you have your home theater system functioning, you may be wondering where you will get content to watch. If you have a Smart TV, you can connect to online streaming websites such as Netflix, Amazon Prime, or HBO.
As mentioned, you can use any CD that you buy from the DVD store if you have a DVD player. Also, if you want a new movie that is still in theatres, you can buy directly from movie distributors, but this will cost you quite a lot. If you have a tighter budget, you can simply wait a week or so for the fine print copy to be released.
Whether it is the rush to get tickets or the annoyance of having people talk throughout the movie, going to a movie theater is a hassle. The purpose of setting up a home theater is so for you to enjoy your movie experience in peace. The comfort you get in your own space will automatically amplify your experience for the better.
When it comes to how to watch theater movies at home, it is highly suggested that you consider investing in quality display monitors, speakers, and other parts because it is a one-time investment for long-term entertainment.