How to Hide Speaker Wire with Hardwood Floors?

How to Hide Speaker Wire with Hardwood Floors?
Spread the love

Aside from the fact that you want to prevent hazard with loose wires, you also want to keep your place neat and organized. Loose speaker wires and cables are not a good sight, and you sure want to find ways to hide them. So, in this article, we will focus our discussion on how to hide speaker wire with hardwood floors. How is it done? Is it your best option? Let’s find out!

Top of the line home theater system and a beautifully decorated living room will look less nice right next to unmanaged cords and cables. Not to mention the number of possible accidents that might happen if your pets chew on them, your children play with them, or somebody trip on them. These are just some of the reasons why you would want to properly hide them aside from keeping your home theater setup secured and damage-free.

What Are Your Options

There are a lot of simple solutions to ensure that you can maintain the aesthetic and flooring design of your room while also minimizing liabilities and hazards of having loose and unmanaged speaker wires around your home. Here are a few decor-friendly tricks for hiding wires on hardwood or even laminate floors.

ChordSavers Floor Cord Covers

These are tough covers which are usually made of PVC but what you will see is floor-matching wood grain. They are rigid, attractive, and they grip the floor even without adhesives, unlike plastic cord protectors. You just have to separate the arched wood cover from the flat base, lay the cables across them, and snap the cover back on. You can choose between

Dark Oak, Light Oak, or the Cherry finishes.

These covers also have an unfinished stainable version if your flooring has a unique finish which will require an exact match. They can readily accept any wood stain by simply brushing on a coat or two and just like that the cord cover will disappear into your floor.

Electriduct Cable Shield

This shield is a rigid, two-piece PVC cord cover with a maple-like wood grain finish, although a terracotta color is available too. Its underside has an adhesive coat which can lock the cord cover into place on any floor type. It can also withstand the pressure of up to 661 pounds from heavy furniture or foot traffic. You can also choose from five different widths to fit different amounts and sizes of cables.

Self-Adhesive Woodgrain Contact Paper

This contact paper is designed to camouflage your cord covers and wires. It is terracotta-colored and is considered to be an effective, easy, and budget-friendly way of keeping plastic cord covers from distracting the beauty of your home, and it is simple to apply too. You only need to cut the contact paper to the size of your choice, peel off the backing, and then smoothly place it over the surface of the cord cover. It stays put and can be easily wiped clean.

Running The Wire Along the Edge of The Floor

You can simply run a razor along the top of the molding that meets the wall so you can cut the paint seal. Remove the base moldings then carefully pull back so you can separate the molding from the wall. Move over to the next stud and redo the process until you can remove the entire piece of molding away. However, do this with a lot of care not to damage the molding.

The next step will be to run the wire on the space between the wall and the edge of the planks if it is large enough to fit the wire and then cover it up with the molding. If it is not feasible, you can create a channel in the wall where you can run the wire through. After you have run the wire through the molding channel or the drywall that you created, install metal nail plates around the wires, and then reinstall the moldings onto the wall.

How to Hide Speaker Wire with Hardwood Floors: Tips, Warnings, and Other Things to Consider

  • Choose a shield or a cord cover close to the color of the hardwood floor, or you can purchase adhesive covers that better match the color of your floor.
  • To ensure that you have enough excess cord, you have to disconnect one end and run it into the opening of the shield.
  • Make sure that the cord is not pulled too tight or not stretched when you position it on the floor.
  • Check and ensure that the floor is free of dirt and dust before you run the cord.
  • Avoid the wires from crimping at corners and keep them rounded so their performance will not be affected and they do not get damaged.
  • You might want to consider placing a chair, table, or any furniture in a way that it covers part of the cord length.
  • Do not run cords under a carpet as it can cause fire hazards.

The Verdict

After focusing our discussion on how to hide speaker wire with hardwood floors, can you now work on keeping your living room or home theater area free from unmanaged and loose cables and wires?

Well, you can start with the few simple ways we have stated above to resolve that issue. Do take note that these are just merely suggestions or options you can choose from. If you are doubtful that you will be able to pull it off or you are just not comfortable with these ways, you can always ask for assistance. What’s important is to make sure that you find a way to organize and hide those wires as soon as possible as they can also cause hazards to your house. You know what they say, prevention is better than cure.

Furthermore, we can also conclude that the goal of organizing these wires is not only to achieve and maintain the beauty of your house but also for safety purposes since accidents can happen if you just let those wires remain unmanaged. Just make sure that when you decide to hide them, you follow the necessary steps and consider some warnings so you can do it safely and correctly.

Leave a Comment:

Leave a Comment: