Blu Ray players offer sharp video and clear audio for a more enjoyable experience. This is thanks to its highly engineered design and state-of-the-art construction, which uses and filters nothing but high-quality sources.
Other than those, its optimum performance can be achieved with proper connection to home theater devices. Read on to learn how to connect Blu Ray player to home theater system.
There are several ways to connect a Blu Ray player to a home theater system. These are the easiest yet effective ways to bring out the most of your devices. Let’s take a look at some of the connection methods that are commonly used in most households.
The lack of HDMI inputs on AVR or pre/pro and TV requires the need for a component video and digital audio. This primarily consists of three color-coded RCA connectors including red, blue, and green connectors.
Depending on the player’s model, the features may also vary accordingly. This may include differences in video quality and component outputs.
Component video doesn’t come with any audio. Thus, a digital audio output connected to an AVR or pre/pro is required. This will result in older sound formats, which can be a bit lossy due to the discarded audio information. On the other hand, the lack of AVR or pre/pro requires direct connection to a TV through a two-channel analog output, particularly the red and white RCA connectors.
High-end Blu Ray players usually come with multi-channel analog outputs that are connected to six to eight connectors. Having such a player allows connection to multiple outputs to ensure proper decoding of the audio on both 5.1 and 7.1 surround sounds.
This type of audio can replace the coax or optical audio output together with the component audio output. The results will depend on the home theater system used.
Many prefer this connection instead of HDMI cables due to full-glory quality. However, its use can bypass several processes and functions, which may result in low frequencies on the subwoofer or improper bass management. The multichannel analog audio also requires six to eight separate cables to prevent limited performance.
The most recent models of Blu Ray players allow direct streaming of numerous content from the internet. This requires the connection of an ethernet port to the home router. There are also Wi-Fi-capable players that come with a built-in or optional dongle, which is also connected to the ethernet port.
The best and probably the simplest way to connect Blu Ray player to the home theater system is through HDMI cable. This involves connecting the player’s HDMI output to an HDMI input present in the home theater receiver or processor.
While some users opt to connect their players directly, there are those who use an AVR or pre/pro in connecting the HDMI output to a television unit. Doing this will let you enjoy the full audio benefits of the Blu Ray, including the so-called DTS-HD Master Audio and Dolby TrueHD. The typical lousy surround sounds produced by the internal speakers will also be eliminated.
There are high-end Blu Ray players that are built with two HDMI outputs: one for TV connection and one for AVR or pre/pro connection. In cases where there is only one output, an HDMI splitter is the best solution. It will allow one HDMI input while splitting it into two outputs for the TV and the AVR or pre/pro. Extra care should be given with the use of splitters since there are models that either block 3D signals or consistently allow video without any audio.
In choosing HDMI cables, the length should be the primary concern. Relatively short cables, which are about six feet long, are not recommended to avoid the occurrence of “sparklies” or images of the light’s flashpoints. The best option is to settle for HDMI cables with a maximum length of 15 to 20 feet.
Longer lengths can also be used but with the presence of a system that converts HDMI to optical fibers or coax cable before sending it back to the HDMI on the other end.
The use of 3D-capable players together with an AVR or pre/pro and TV unit also requires the same configurations. However, there are some AVR or pre/pro units that don’t allow the passing of the player’s 3D signals to the TV. These cases need a direct connection of the HDMI output to the HDMI input.
Some home theater systems require a coaxial digital-audio connection. This uses an orange-colored RCA connector to provide high sound quality even with a two-channel music source. The sounds produced in a coax connection also tends to sound better than optical audios due to fewer technicality issues.
Using the same Blu Ray player for playing videos and CD is also done. Try to test the device by simply connecting the HDMI and coax outputs of the player to an AVR or pre/pro. Compare the sounds produced by the different input assignments.
Some players send signals from the HDMI and audio outputs simultaneously yet still don’t give instantaneous results. There is a chance that the difference in sounds can’t be distinguished. Hence, choosing an appropriate connection is a must. Be sure to always use the HDMI for Blu Ray devices to hear the highest resolution audio formats.
Blu Ray players are a good addition to your home entertainment system due to its sharp video and clear audio production. This device should be properly installed to the different systems to ensure optimum performance.
Knowing the common ways on how to connect Blu Ray player to home theater system allows you to select the best and most appropriate connection method. Choosing the best option will give you a clear picture and outstanding sound quality right inside your own home.
No matter what connection method you choose, always keep in mind that other than the performance, the safety of the device and its users should be the top priority. Happy listening!