Most of the speakers in the market do not come with speaker wires. It is your choice to make a selection of the best gauge as well as the type of wire for your home theater system. So, if you are a sound quality enthusiast, then you do not have any option than to go for the best gauge speaker wires.
Speaker wires come with or without connectors, and for ceiling or in-wall speakers, you will need UL-rated speaker wires labeled CL2 or CL3. If you intend to run the wire underground to connect with a set of speakers outdoors, then you will need to get wires rated for direct burial.
Speaker wire gauge or thickness is rated by the American Wire Gauge (AWG) number. Thicker wires come in lower gauges, and they have less resistance to the flow of current. Thick wires are mostly recommended for a long wire run, low-impedance speakers and high power applications.
If you’re wondering what’s the gauge speaker wire that will give you the best bang for your buck, you’ve come to the right place. We’ll be checking out three products’ notable features as well as their major highlights and minor setbacks.
This speaker from Monoprice comes in a flat package and very much easy to route around stereo equipment corners, racks, and other equipment when compared to round speaker wires.
With an overall size of about 12.4 x 2.0mm, the Monoprice Planate Series 16 Gauge Pure Copper has cable markings on one of the two conductors. It also has a CL2 rated PVC jacket, so it is safe to route through and within the walls in the home.
The 16AWG Pure Copper also assures you get a superior conductor when compared with copper-coated aluminum conductors that can be found in other inexpensive wires.
Finally, it comes with a lifetime warranty that assures you that you are getting a speaker wire that will serve you for a very long time.
Maxbrite’s speaker wire is engineered and designed to maximize the performance of any type of audio system.
It comes with a top quality 2 conductor speaker wires with a flexible PVC jacket and red stripe polarity which allows for easy, fast, and accurate installations. The 14 AWG Pure Copper strands allow for undistorted and clear signals to every sound system.
The copper conductors of the Maxbrite 14 Gauge Speaker Wire are 99.9% oxygen free, and the wire is spooled for easy storage and dispensing.
It is compatible with bare wire connectors, banana plugs, bent pin or spade tip connectors.
The GearIT 16AWG Speaker Wire is a high-grade premium top quality speaker wire designed to give the best quality signal from the speaker to the A/V amplifier or receiver. It is packaged in a handy pull box for stress-free dispensing, cutting, measuring and storing.
With a tough but flexible highly insulated jacket covering the wire, the best sound is assured on every audio equipment.
The white-colored speaker wire has a 16 gauge thickness with a plastic jacket protecting the core. With its length of 30 meters/100 feet, it can cover a large area.
Further, The GearIT 16AWG Speaker Wire features copper-coated aluminum that allows it to offer better resistance to interference and distortion compared to the other types and it is more reliable. This also gives wire better conductivity with great sound delivery.
The Copper-Clad aluminum (CCA) has its advantage in that it is more flexible and lighter than copper wires. It’s also less expensive when compared to oxygen-free copper, and you can enjoy the same sound quality without an additional cost of installation.
Additionally, the GearIT 16AWG Speaker Wire can easily pair with banana plugs, bent pin connectors or spade tips to connect speakers to the A/V amplifier or receiver.
Lastly, this speaker wire is delivered wrapped around a solid plastic spool, which makes dispensing, cutting, measuring, and storing convenient. The sequential foot marking on the jacket also allows for accurate and stress-free set up.
When shopping for the best gauge speaker wire for home theater systems, it is best to consider the gauge number. The lower it is, the thicker the cable. For you to choose the right gauge speaker wire, you will need to consider the impedance rating of the speaker.
The impedance of the speaker is the resistance the speaker offers when current is supplied through an amplifier. Just like resistance, impedance is measured in ohms, and when it comes to choosing a good speaker wire, it is best to go for ones that a receiver or amplifier can handle.
Our three speaker wire selections have been proven to be of top quality. If you are on a budget and still want the best quality, then you can go for the GearIT 16AWG Speaker Wire. Though it comes with a copper-clad aluminum, it still offers the same sound quality as the Maxbrite 14 Gauge Speaker, though this comes at a higher cost.
However, the Monoprice 16 Gauge Pure Copper Wire is considered much easier to route around stereo equipment corners, racks, and other equipment when compared to the other speaker wires.